Municipal intake, booster and sewage duty — corrosion-resistant stainless and duplex.
Acid and solvent transfer, ANSI/ASME B73.1 process pump components.
Seawater cooling, ballast and fire pumps in bronze and duplex alloys.
High-chrome wet-end parts for abrasive service and short replacement cycles.
Boiler feed, condensate and ash-handling components.
Build-to-print supply for pump OEMs and aftermarket distributors.
The same impeller geometry is a different part in three different plants.
| Alloy | EN / spec | Typical service |
|---|---|---|
| CF8M / 316SS | 1.4408 | General chemical duty, mild corrosives, water and wastewater |
| CD4MCu / CD4M | 1.4517 | Duplex — chloride and erosion resistance, seawater and slurry |
| CN7M / Alloy 20 | 2.4660 | Sulphuric acid and mixed acid service |
| WCB carbon steel | 1.0619 | Clean water, oils, general non-corrosive duty |
| Bronze C95800 / C90300 | — | Seawater, marine and fire pump components |
| High-chrome 27% Cr | A532 | Abrasive slurry, mine dewatering, ash handling |
Upload a 2D drawing, 3D file, nameplate photo or a picture of the worn part. We review material, tolerances, process route and inspection needs, then come back with a firm quotation.
Request a Quotation